Pellet Stove Furnace

Pellet stoves can be used as a supplemental heat source or, with proper venting, a primary heating option. They are available in freestanding units as well as fireplace inserts that give your home the look of an old-fashioned wood-burning fireplace.

The auger moves the pellets out of the hopper into the combustion chamber, where they are burnt and generate heat. Sensors detect the flame and adjust the rate of operation in order to maintain a desired room temperature.

1. Energy Efficiency

Pellet stoves burn renewable non-toxic, non-toxic fuel that is made from compressed sawdust and wood chips. They also contain bark, and other materials that are normally put in landfills, but can be repurposed into a clean and efficient source of heating. They can help homeowners cut down on their energy use and thus greenhouse gas emissions. Many owners of pellet stoves report recouping their initial investment in just a few years through lower heating costs.

Pellets are more dense and compressed than natural wood, which makes them more efficient in burning. They also produce much less creosote buildup than traditional fireplaces made of wood. They are also packaged in plastic bags that block out moisture and require less frequent cleaning.

Like other heating systems pellet stoves need to be properly measured and vented. A skilled technician can assess your venting and space requirements to ensure the best results.

When the installation is completed the hearth is constructed in accordance with your specifications. Then, the vent is inserted through a hole that is cut in the exterior of your home. The vent can be run through a roof or sidewall depending on your preference and the local laws.

When the vent and hearth are complete then the pellet stove can be connected and turned on. Certain manufacturers offer a remote control to make it easy to start and keep the fire going, while other manufacturers offer additional sensors that check airflow and combustion flue temperatures, as well as pressure. When the system detects that it requires more or less pellets, it signals the auger to speed up or slow down in line with the need.

All stoves have a storage hopper that holds from 35 to 130 pounds of pellets until they're needed. Hopper capacities determine the frequency at which the stove has to be filled with more hoppers, allowing longer intervals between refills. A grille draws air out of the room, then passes it over the heat exchanger and then blows heated air in the living area through convection. A grate or auger distributes the pellets, and an under-sink pan will collect any unburnt ones along with combustion residue.

Pellet stoves are more efficient in energy use than wood-burning stoves, but they are not as efficient as natural gas or electric furnaces. Electric components that drive motorized parts of stoves require electricity. This could be an issue in the event of power outage, though backup systems such as batteries and generators are available.

2. Low Maintenance

Pellet stoves are incredibly efficient, but like any major heating appliance they require a bit of maintenance to ensure they are operating properly. Cleaning your stove's exhaust vents and the stove will help prevent the accumulation of harmful creosote that can cause an explosion, fire or damage to your home or stove.

A pellet stove uses compressed natural particles (such as kernels, nutshells of corn or tiny pieces of scrapwood) made from wood or other substances. An auger powered by electricity is used to feed the pellets from a fuel tank into the burner, and into the combustion chamber. The speed at which pellets are fed into the burner is controlled by the thermostat you set. The fire can be kept roaring or reduced or even snuffed out depending on the temperature you set. When the fire goes out, the ash is dropped into an empty ash tin beneath the burner that can be easily removed and disposed of.

Pellets are made from byproducts from lumber processing that would otherwise be discarded. They are a renewable source and produce less particles than traditional wood-burning stoves, making them a cleaner heating source. The amount of carcinogens, carbon monoxide and other harmful chemicals that are released from pellet stoves are also less than the latest EPA certified wood stoves.

Due to the low emissions they produce, these stoves are not required to be vented through a chimney as traditional wood stoves, but should be properly vented through a wall or another external structure. Pellet stoves have flue ports that are open at the top or rear of the appliance. They are connected to a vent pipe that extends outside the home.

A pellet stove has one disadvantage it requires you to purchase or store enough fuel pellets to last for the whole winter season. Pellet stove owners typically use three tons of wood pellets every winter, which is a cost of $200 per ton. The costs can increase over time, but it is cheaper than buying and hauling firewood to traditional fireplaces or stove. Be sure to purchase enough pellets so that your stove will last through the coldest months and you have a suitable place to store the pellets (preferably dry, cool and off the ground).

3. Reduce carbon footprint

Pellet stoves utilize renewable biomass fuel to create heat, which reduces the need for fossil fuels that are depleted. This reduces carbon footprints and diversifies energy sources for homes.

Even the most modern woodstoves that are EPA certified emit significantly less carbon dioxide than pellet stoves. The emissions from pellet stoves also are considerably lower than ones from gas furnaces. Pellets are made from sawdust and bark as well as other wood remnants. They could also include soybeans, corn, or agricultural waste. When they are burned, they release less particulates, which could cause respiratory problems and allergies, carcinogens and nitrous dioxide.

The feed system is the main difference between pellet stoves and wood stove. Pellet stoves are equipped with hoppers to hold the pellets. When the thermostat or sensors suggest that the room requires heating, the auger is turned and the pellets are fed into the combustion chamber where they are burned and generate heat. The combustion chamber's air is pumped through a heat exchanger, which transfers heat to the blower. This process produces very low emissions, and creosote does not created.

After the hopper is empty, a cyclone process removes the ash and deposits it in an ash pan. The stove also has fans to circulate the fresh, heated air throughout the living area. The majority of pellet stoves require little maintenance and come with a huge viewing space for you and your family to relax and enjoy the flames.

The main factor that influences emissions from stoves made of pellets is the quality of the pellets. The poor quality pellets emit more emissions. When selecting your pellets ensure they are certified as meeting certain standards and do not contain other ingredients such as petroleum-based or urea-based substances. Choose a company that has a guarantee and will replace or repair parts in the event of a problem. If you're looking to take the greener route Some states allow homeowners to get a tax credit when installing pellet stoves. This is a great way to offset the initial costs of this kind of stove and make installation more affordable.

4. Reduced Noise

Pellet stoves produce very little smoke or exhaust compared to fireplaces with wood burning. They also use an electric fan to distribute the heat more evenly throughout the space. This is one of the reasons that pellet stoves require much less maintenance than traditional wood stoves. While wood stoves have to be frequently cleaned of dust and chemicals pellet stoves need a specialized metal vacuum cleaner for routine cleaning.

Many manufacturers have designed their stoves so that they are simple to set up and operate, as well as maintain. They also make their appliances in a wide range of styles to match your home's decor. Some models include WIFI, a remote control and thermostat that can be programmed.

The majority of pellet stoves have a large fuel hopper which can hold anywhere from 35 to 130 pounds of pellets. The more info pellets are then fed into the combustion chamber by an auger. The speed at which the pellets are delivered to the burner determines how hot the flame is and also the amount of heat produced. The hopper could be filled with hardwood pellets made from dense wood species such as oak and hickory or softwood pellets. Many stoves can burn biomass pellets made from corn and switchgrass. This is a green option.

Because pellet stoves burn such as a clean fuel, they produce far less smoke than conventional wood-burning fireplaces and require fewer maintenance. They don't require a chimney and are therefore the best choice for retrofits or new construction.

Pellet stoves don't require regular cleaning of creosote or other chemical similar to wood stoves. They require only periodic inspections to ensure proper operation and maintenance. Based on the model, this might include regular inspections and cleaning of the accumulated Ash or "clinker," as well as the motor and fan. Your appliance dealer can provide the proper procedures for your specific model and brand. He can also provide information about storage and safety and help you find the correct fuel for your stove.